Description
Aluband is designed specifically as a premium window flashing tape and forms part of the Thermakraft One Wrap System. Made with a heavy bituminous adhesive, the product provides high strength bond and excellent abrasion resistance.
Thermakraft Aluband Window Flashing Tapes can be used within the following scope:
- Installed into and around frame joinery opening over the wall underlay and exposed frame to cover both the face and edge of the opening framing as a secondary weather resistant barrier.
- Installed at joinery heads to seal flashing upstands to the wall underlay.
- To assist the overall weathertightness performance of window and door joinery installations.
- To be used in conjunction with air seals and joinery flashing systems. Installer must check for air seal product compatibility with Aluband Window Flashing Tape.
- Thermakraft Aluband Window Flashing Tape must be used with Thermakraft Corner Moulded Pieces (on windowsill corners).
- Situated in NZS3604 Wind Zones up to, and including ‘Extra High’.
General:
- Compatible with all Thermakraft building underlays.
- Unaffected by LOSP or other solvent based treated timber. However, LOSP or other solvent based treated timber must have sufficient time for the solvent to flash off in a well ventilated area. Recommended minimum 7 days.
- Thermakraft corner moulds MUST be used at flashing corners.