Description
Pryda Joist Hanger Stainless Steel 52x124mm
Pryda Framing Brackets - S/Less Steel Joist Hangers
Product Code: MPFB52124/S
The Pryda Framing Brackets are suitable for fixing joist to joist to beam, truss to truss, rafter to purlin and hangers to joists where
a strong, rigid joint is required between members meeting at 90 deg. and floor joist. All these framing brackets use 35 x 3.15mm Pryda Product Nails or 12g x 35mm Type 17 Hex Head screws. The Framing Brackets must be fully nailed or screwed to achieve full design load capacities.
USES
Pryda Framing Brackets are suitable for fixing joist to joist, joist to beam, truss to truss, rafter to purlin, and hangers to joists.
FEATURES
- Cost effective, eliminating the need for costly on-site skilled labour to make special housing for joints etc.
- Easily fixed into position with Pryda Timber Connector Nails, or self-drilling screws.
- These hangers have wide flanges for ease of nailing and screwing.
- The Pryda range of brackets provides for most common timber: sizes, glued laminated beams, I-joists and trusses.