Description
What's included
- M18 FUEL™ 1/2in High Torque Impact Wrench with Pin Detent (Tool Only)
- 2x M18™ REDLITHIUM™ 5.0Ah Battery
- M12™ & M18™ Rapid Charger
M18 FUEL™ 1/2in High Torque Impact Wrench with Pin Detent (Tool Only)
Product Description
The M18 FUEL™ ½in High Torque Impact Wrench w/ Pin Detent provides maximum power density and greater access in tight spaces, maximising productivity through faster bolt removal speeds. The POWERSTATE™ Brushless Motor delivers up to 1,220Nm of Fastening Torque and 1,490Nm of Nut-Busting Torque when paired with the M18™ REDLITHIUM™ FORGE™ 6.0Ah Battery, while the compact size at 185.4mm in length gives users greater access in tight spaces. The new battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 68Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops.Product Features
- With up to 1,220 Nm of fastening torque and 1,490 Nm of nut-busting torque when paired w/ M18B5 Battery.
- At only 185.4mm in overall length the M18FHIW2P120 offers improved access in tight spaces along with a lighter more ergonomic weight when working at heights.
- 4-Mode DRIVE CONTROL provides greater control over output speeds and power, including AUTO SHUT-OFF and Bolt-Removal Mode.
- A new Battery Isolation System provides secure connection and controls vibration transmitted to the battery pack, preventing battery intermittency.
- Featuring a on tool tether ring means users can confidently secure the tool when working from heights.
Product Specifications
Platform: M18 FUEL™
Voltage: 18V
Anvil Type: 1/2in Square with Pin Detent
Nut Busting Torque: 1,490 Nm
Fastening Torque: 1,220 Nm
IPM: 0 - 1,400 / 0 - 2,500 / 0 - 2,700 / 0 - 2,700
No Load RPM: 0 - 700 / 0 - 1,300 / 0 - 2,000
Drive Control: 4 Mode with Auto Shut-Off Mode & Bolt Removal Mode
Length: 185.4mm
Weight: 2.4 kg
Warranty: 5 Years
Torque Level: High
Tri-LED: Yes
Directional No Load RPM: Forwards: 0 - 900;Reverse: 0 - 2,000 / 0- 750
M18™ REDLITHIUM™ 5.0Ah Battery
Product Description
The M18™ REDLITHIUM™ 5.0Ah Battery features superior pack construction, electronics, and performance to deliver more work per charge and more work over the life of the pack than any battery on the market. M18™ REDLITHIUM™ 5.0Ah Battery features an advanced design, protecting the pack against harsh jobsite environments. This protection routes water away from the electronics and out of the battery pack, extends run-time and life by minimising heat, and prevents pack failures from vibration or drops. This unique to MILWAUKEE design also allows the battery to operate in extreme cold weather conditions (below 0°F/-18°C). Managed by MILWAUKEE’s exclusive REDLINK Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. It also provides full system compatibility with 120+ M18 cordless solutions. Upgrade to the M18™ REDLITHIUM™ 5.0Ah Battery to instantly increase the run-time and durability of your M18 cordless tools.Product Features
- Versatility: Powers more than 250+ MILWAUKEE® M18™ cordless power tools.
- REDLINK™ intelligence. Provides optimised performance and over load protection.
- Best in class construction. Offers long lasting performance and durability.
- Fuel gauge on board. Displays remaining run time for less down time on the job.
Product Specifications
Platform: M18™
Amp Hour: 5
Voltage: 18V
Warranty: 2 Years
Weight: 720g
M12™ & M18™ Rapid Charger
Product Description
The M12 & M18 Rapid Charger charges packs up to 40% faster, reducing downtime and maximising productivity. The charger accepts all M12 and M18 batteries, providing an upgrade for both systems. Featuring REDLINK Intelligence, it communicates directly with the battery to monitor cell voltage, temperature, and charge status to optimise the performance and extend the life of the pack. As an added level of communication, the charger indicates when the battery reaches an 80% charge, providing confidence that a substantial amount of work can be completed without waiting for a full charge.Product Features
- Charges batteries up to 40% faster.
- Charges all M12™ and M18™ batteries.
- Sequential charging: automatically charges the second inserted pack once the first pack is fully charged.
- REDLINK™ Intelligence: charger communicates with the battery pack to ensure optimum performance and extend life
- M18™ REDLITHIUM™ 2.0 Ah / 4.0 Ah / 5.0 Ah battery packs recharge in 27 min / 48 min / 60 min or less
- M18™ REDLITHIUM™ HIGH OUTPUT™ 3.0 Ah / 6.0 Ah / 8.0 Ah / 12.0 Ah battery packs recharge in 35 min / 65 min / 83 min / 130 min or less
- M12™ REDLITHIUM™ 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah battery packs recharge in 30 min / 46 min / 60 min / 103 min or less
Product Specifications
Platform: M18™ / M12™
Voltage: 12v and 18v
Weight: 0.8kg
Warranty: 2 Years