Description
Bituminous Paper Thermakraft 213
Commonly referred to as “Building Paper” Thermakraft 213 is a kraft paper based bituminous building underlay that is suitable for use on roofs and walls in residential buildings. It is vapour permeable, meaning that liquid water from the outside is prevented from penetrating but water vapour from the inside can pass through and escape the building envelope. Thermakraft 213 is easy to install.
Scope of use
Roof Application
- Suitable with masonry tile, metal tile and profiled metal roof cladding.
- Direct fix or cavity fix.
- Can be used on roofs up to and including NZS 3604 ‘Extra High’ wind zones.
- Thermakraft 213 requires support. Refer to installation guide regarding underlay support requirements.
- Will provide temporary weather protection during construction (maximum 7 days), same day coverage recommended.
Wall Application
- Suitable for use with both timber and steel framing, either direct fix or in conjunction with an 18mm minimum drained cavity.
- Can be used with absorbent wall claddings (e.g. timber, brick or fibre cement) or non-absorbent wall claddings (e.g. metal or plastic).
- Can be used with masonry veneer in accordance with NZS 3604.
- Suitable for buildings situated in NZS3604 Building Wind Zones up to and including ‘Very High’.
- Will provide temporary weather protection during construction (maximum 28 days).
General
Unaffected by LOSP or other solvent based treated timber. However, LOSP or other solvent based treated timber must have sufficient time for the solvent to flash off in a well ventilated area. Recommended minimum 7 days.