Description
Alpha Screw Extractor No.1 (3.47mm) Carded - 9SE01
Reverse Tapered Cutting Screw Thread
Square Head for use with Tapping Handles
5 Common sizes available
Technical data:
Suits pilot drill: 2.0mm, 5/64"
Suits bold thread diameter: 4.0-4.5mm, 5/32-3/16"
Directions for use:
1. If possible, grind or flatten the head of the damaged bolt or screw.
2. With a heavy hammer and centre punch, mark the centre of the bolt or screw; this will prevent the pilot drill wandering.
3. The extractor requires a pilot hole, start with a small Alpha left handed drill bit (e.g. 5/64’’).
4. If required, drill the hole out larger. It is best to use a left-hand drill for this step, as this may be enough to remove the stud without a screw extractor.
5. Select the correct size screw extractor for the hole.
6. With a tap wrench, turn the screw extractor into the hole in an anti-clockwise direction. The reverse threads force the extractor into the hole until the broken bolt or stud is forced to turn. Continue turning until the stud is removed.